New Original Shantui SD32 Bulldozer 320 Horsepower

SD32
Flywheel horsepower
Rated revolution: 2000rpm
Operating weight: 37200kg

=Final drive
Final drive--2-stage spur gear, speed reduction, splash lubrication
Undercarriage system
Suspension------------swing type of sprayed beam, suspended structure of equalizer bar
NO. Of carrier rollers--2(each side)
NO. Of track rollers-----7(each side)
NO. Of idler-------------1(each side)

=Track shoe
Assembled type--single tooth
Pitch--------------------228.6mm
Width-------------------560mm
Tooth height------------80mm
NO. Of track shoes---41(each side)
Track gauge------------2140mm
Ground pressure-------0.105Mpa

=weight
Operating weight------37200kg
with multi-ripper------40975kg
Hydraulic control system
Max. Pressure---------14Mpa
Type------------------------gear pump
Displacement-----------335.5L/min
Control valve type------guiding valve
Raise, hold, lower, float
Hydraulic tank----------control valve and oil filter inner-installed type
Steering system
Steering clutch----------wet type, multi-disc, spring loaded, hydraulically separated, hand and hydraulic control operated
Steering brake-----------wet type, band brake, foot operated(with hydraulic booster, interconnected with clutch)
Coolant and lubricant capacity

=working device and attachment
Straight-tilt dozer-----------hydraulically actuated with servo valve
Blade supporting method--brace type tilt cylinder on right side
Width---------------------------4130mm
Height-------------------------1590mm
Max. Lift above ground----1560mm
Max. Drop below ground---560mm
Max. Tilt adjustment--------1000mm
3-shank ripper
Max. Digging depth--------------------542mm
Max. Lift above ground-----------------883mm
Standard digging angle--------------45°
Variable within range between35° -63°
Max. Digging depth of single ripper--1250mm
Max. Lift above ground----------------965mm
Overall dimensions
LXWXH------------------------------------6880x4130X3725CM